What is Fort Saskatchewan Condensate?

Fort Saskatchewan condensate is a fractionated stream produced by Keyera at their Fort Saskatchewan operations. CFT is delivered into CRW at the Enbridge Edmonton Terminal on a continuous, rateable basis.

Composition Summary

View Full Analysis

Property (vol%)Most Recent Sample6 Month Average1 Year Average5 Year Average
iso-Butane 0.61 0.59 0.59 0.39
n-Butane 2.87 2.79 2.79 2.71
iso-Pentane 20.85 22.05 22.05 23.74
n-Pentane 22.33 22.61 22.61 23.50
Hexanes 19.60 18.42 18.42 19.01
C7 x C12 30.63 29.50 29.50 27.79
Total C12- 96.98 96.01 96.01 97.19
C13 x C30+ 3.02 3.99 3.99 2.77

BTEX

(Click for chart)

Property (vol%)Most Recent Sample6 Month Average1 Year Average5 Year Average
Benzene 0.89 0.78 0.78 0.80
Toluene 1.33 1.06 1.06 0.98
Ethyl Benzene 0.16 0.13 0.13 0.10
Xylenes 0.95 0.66 0.66 0.49
BTEX Total 3.33 2.62 2.62 2.36

Trace Sulphur

Property
(mass ppm)
Most Recent Sample6 Month Average1 Year Average5 Year Average
Volatile Mercaptans - - - 34.1
C7- Mercaptans - - - 51.0

Export Fort Saskatchewan Condensate Data

.xls

Enter date range for custom report :
to (Format: DDMMYYYY)
(leave blank for all available dates)

Use checkboxes adjacent to each property to select which properties you would like to export. Once you are done, click to export custom report in xls format:

Most Recent Sample Comments:
CFT-477, Jun 12, 2017

Last 6 Samples

Density, sulphur, and BTEX were marginally higher than average for the June sample of Fort Saskatchewan Condensate.

Basic Analysis

PropertyMost Recent Sample6 Month Average1 Year Average5 Year Average
Density (kg/m3) 689.9 686.2 686.2 679.1
Gravity (oAPI) 73.4 74.5 74.5 76.7
Sulphur (wt%) 0.14 0.08 0.08 0.06
MCR (wt%) ND ND ND ND
Viscosity @ 7.5oC (cSt) 0.59 0.56 0.56 0.56
RVP (kPa) - - - 86.9
Sediment (ppmw) - - - 28
Organo-Phosphorus (ppmw) - - - 1.8
Oxygenates (wt%) - - - ND

*ND indicates a tested value below the instrument threshold.

.xls Custom Report Exporter

You have selected for Fort Saskatchewan Condensate (CFT) crude.

Select a date range for your custom report:

  (Format: DDMMYYYY)

(Leave blank for all available samples)